lenalotte Geschrieben 1. April 2005 Teilen Geschrieben 1. April 2005 Aloha, in den nächsten Tagen wird es ein neues Build von Embird und Embird Studio geben. Good Morning, I have fixed some errors in Studio and I have also added some new tools. The new build of both Embird and Studio will be available within a few days. Changes in the Studio: - Cavities and carvings can be drawn not only for last object in the list but for any selected object that can have cavities or carvings. - New 'straighten image tool' to compensate scanned image deformity - 'Create fill from outline' tool - Tif and png images preview - Snapping error for designs larger than 30 cm fixed - Error that occurred when opening and compiling designs with custom patterns fixed. - Error disabled controls when transformation window is active fixed - Thread catalog error that occurred when Embird is installed on other than C drive fixed. Best regards Dusan Liebe Grüße, Lena Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
sticki Geschrieben 1. April 2005 Teilen Geschrieben 1. April 2005 Und übersetzt von Google: Gutenmorgen, habe ich einige Störungen im Studio geregelt und ich habe auch einige neue Werkzeuge addiert. Der neue Bau von Embird und von Studio ist innerhalb einiger Tage vorhanden. Änderungen im Studio: - Räum und Carvings können nicht nur für letzten Gegenstand in der Liste aber für jeden möglichen vorgewählten Gegenstand gezeichnet werden, der Räum oder Carvings haben kann. - neu ' richten Sie Bildwerkzeug ' gerade, um abgelichtete Bildmißbildung auszugleichen - ' stellen Sie Fülle von der umreiß ' Werkzeug her - Tif und png-Bildvorbetrachtung - reißende Störung für Designs größer als 30 Zentimeter geregelt - Störung, die auftrat, als öffnende und kompilierende Designs mit kundenspezifischen Mustern regelten. - Störung sperrte Kontrollen, wenn Umwandlungfenster aktives örtlich festgelegtes ist - verlegen Katalogstörung, die auftrat, wenn Embird an anders als den reparierten c-Antrieb angebracht wird. Bester Respekt Dusan Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
zimtstern Geschrieben 1. April 2005 Teilen Geschrieben 1. April 2005 ... - reißende Störung ... - verlegen Katalogstörung, die auftrat, wenn Embird an anders als den reparierten c-Antrieb angebracht wird. ... Zum Glück ist embird wesentlich besser als die Google-Übersetzung vermuten lässt Also Warten und öfter mal vorbeischauen bei www.embird.com Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
smilla Geschrieben 1. April 2005 Teilen Geschrieben 1. April 2005 lol Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
lenalotte Geschrieben 15. April 2005 Autor Teilen Geschrieben 15. April 2005 Die Betaversion (=Testversion) ist draußen! Date: Fri, 15 Apr 2005 15:49:04 -0000 From: "embirdsfumato" Subject: Dusan - New Build 6 - BETA Good Afternoon, I would like to inform you that new build 6 of both Embird and Studio is available for download from http://www.embird.biz/sw/embird/newdown.htm As there are major changes in the internal structure of both programs, the new build is available only in the BETA testing version for now. We would be glad to hear your findings and comments regarding this new build as well as suggestions for future upgrades. Besides internal changes, there are also many improvements in functions and fixes. Please find list of main changes below this message. Thank you very much for your great help. With best regards Dusan Balara Embird Team ----------------------------------------------------------- Version 2004 Build 6 EMBIRD MANAGER ============== - New command "Output to EMD Smart Media Card" added to write cards for Xquisite embroidery machines. - New command "File Summary Info" for adding the "Title", "Author", and other comments to your design. These information will be displayed in the yellow hint when you display the design in Manager. This command works only on PCs with Windows 2000 and Windows XP, and only with disks formatted with NTFS file system (i.e. it does not work with FAT system). - New command "Send to 3rd Party Application" added to "Right Panel" menu in Manager. This command is intended for 3rd party software developers of plug-ins for Embird. Embird will convert the selected files to interchangeable format and send them to the "3rd party application" for processing. - If you select "Print Design Snapshot", "Print Detail Documentation", etc. from Right Panel menu, Embird will allow you to specify the "Price per 1000" stitches setting, which will be used for calculation of the design price. - Support for new formats Ameco .NEW, Siruba .PLT, Sunstar SWF .SST added. - Bug with displaying some of .VP3 files fixed. - Bug causing automatical adding of trimming codes in .VP3 format fixed. - Bug causing that some .PES and .PEC files were not recognized on embroidery machine fixed. - Several other minor bugs fixed. EDITOR ====== - New command "Separate" added to "Edit" menu in Editor. Use this command to separate parts in selected object. - New commands were added to popup menu, which appears when you right click on one of the small color boxes in Editor. These new commands are "Swap Sewing Order with Next Color" and "Swap Sewing Order with Previous Color". STUDIO ====== - Cavities and carvings can be drawn not only for last object in the list but for any selected object that can have cavities or carvings. - New 'straighten image tool' to compensate scanned image deformity. - 'Create fill from outline' tool. - Tif and png images preview. - Snapping error for designs larger than 30 cm fixed. - Error that occurred when opening and compiling designs with custom patterns fixed. - Error disabled controls when transformation window is active fixed. - Thread catalog error that occurred when Embird is installed on other than C drive fixed. - Enhanced Help file – Contents, Index, Search capability, New tutorial `How to digitize logo' for beginners. - Faster drawing of object in work area. - Selection box, transformations and shapes are now visible on all backgrounds, including the medium gray background (r=128, g=128, b=128). FONT ENGINE =========== - Embird now supports UNICODE characters in Font Engine plug-in when running on computer with Windows 2000 or Windows XP. You will find the check box for choosing UNICODE characters above the "Fonts" box in "Editor -> Insert -> Font Engine Text" dialog box. CROSS STICH PLUG-IN =================== - Cross Stitch will now display a dialog box when is starts, allowing you to specify the size of work area. This way you can limit the work area to the size of your hoop. - New dialog box added to "Autodigitize Crosses from Image" added to "Image" menu in Cross Stitch plug-in. This dialog box allows you to specify the size of design created automatically from image. - New option "Add outline to each color in the design" added to Cross Stitch plug-in. - Now you can create Back Stitch lines in Cross Stitch! New tools allowing this were added to "Tools" menu: * Back Stitch * Back Stitch Draw * Back Stitch 1/2 * Back Stitch Draw 1/2 * Erase Back Stitch * Back Stitch Color * Get Back Stitch Layers * Set Back Stitch Layers Find more information about these new tools in Embird help file - press F1 in Embird. - New menu "Insert" added to Cross Stitch dialog box. This menu contains the following items: * Insert Outline * Insert Outline Around Each Color (1 Color) * Insert Outline Around Each Color (Multi-Color) - New commands "View Crosses as Crosses" and "View Crosses as Squares" added to "View" menu in Cross Stitch window. Use these commands to choose the view mode for crosses on work area. - New command "Back Stitch Lines" added to "View" menu. Use this command to enabled/disable displaying of back stitch lines. - Two new panels added to "Color Palette Bar" in Cross Stitch. These new panels are located at the bottom of the Color Palette Bar. Panels contain the colors used for crosses (first panel) and colors used for back stitch lines (second panel). When you right click on the color on this panel, a popup menu will appear, containing the following commands: * Select Color (only for crosses) * Select Color and Back Stitch Lines (only for crosses) * Show/Hide Color * Show All Colors * Hide All Colors * Show All Colors Except This One * Hide All Colors Except This One * Choose Color from Catalog * Choose Color from Palette * Set to Previous Color * Set to Next Color * Swap with Previous Color * Swap with Next Color * Swap Sewing Order with Previous Color * Swap Sewing Order with Next Color * Delete Color * Delete All Colors * Delete All Colors Except This One * Find Color in Catalog Use these command to change color, show/hide color, delete color, change the sewing order of colors, etc. EMBIRD TUTORIALS ================ - New tutorials are available at http://www.embird.com/sw/embird/videos.htm: * Embird Cross Stitch (updated) * Output to EMD Smart Media Card * Open Pfaff Grand Hoop Design * Save Pfaff Grand Hoop Design - Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Ernamaus Geschrieben 15. April 2005 Teilen Geschrieben 15. April 2005 So, das wars dann bei mir geht nix mehr, auch mit der alten Version nicht. Ich werd nicht mal gefragt, wo ich es speichern will. Natürlich habe ich auch das alte schön gelöscht. Ich bin so d..... Katrin Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
lenalotte Geschrieben 15. April 2005 Autor Teilen Geschrieben 15. April 2005 Du kannst die alte Version (Build 5) noch bei Embird downloaden: http://www.embird.biz/sw/embird/newdown.htm Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Ernamaus Geschrieben 15. April 2005 Teilen Geschrieben 15. April 2005 Ist ja komisch, das hatte ich vorhin auch schon versucht und es ging nicht, jetzt ging sogar die neue Version. Naja, der Computer das unbekannte Wesen. Ich danke Dir LG Katrin Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Empfohlene Beiträge
Erstelle ein Benutzerkonto oder melde Dich an, um zu kommentieren
Du musst ein Benutzerkonto haben, um einen Kommentar verfassen zu können
Benutzerkonto erstellen
Neues Benutzerkonto für unsere Community erstellen. Es ist einfach!
Neues Benutzerkonto erstellenAnmelden
Du hast bereits ein Benutzerkonto? Melde Dich hier an.
Jetzt anmelden